• compressible adapters for bridging diameter differences between air cylinder and sleeve in flexo presses
• exclusive compressible surface for optimum printing quality combining screen and full tone printing within one colour
• consistent printing results with long life
• standardised quality guarantees constant printing conditions for large orders or repeat orders
• easy mounting of printing sleeves using compressed air
• quick set-up times and easy handling
• suitable for ITR photopolymer sleeves, e.g. nyloflex ITR Thin

Compressible adapter for almost all types of air cylinders,
nearly independent of the air hole patter

• available wall thicknesses from 10.5 mm to 80 mm
• no additional air connection required
• constant outer diameter at fluctuating temperatures or high air-humidity
• high repeat steps possible

Compressible adapter without own air conduction system

• available wall thicknesses from 5.4 mm to 10.5 mm
• no additional air connection required - conducts air from the air-cylinder to the surface via air-holes
• interlock notch with position mark on opposite end

Compressible adapter with air connection and dedicated air conduction system

• available wall thicknesses from 22.5 mm to 100 mm
• independent of cylinder air-conduction
• high repeat steps possible
• constant outer diameter at fluctuating temperatures or high air-humidity